Hi, VADANIA fans!
We will show you the detail installation steps of blind corner swing tray kitchen cabinet organizer here.
Step 1.
Check whether the equipment parts are complete. Prepare electric drill, tape measure and pencil.
Step 2.
Measure kitchen cabinet. Minimum dimensions must be 850mm(L) x 600mm(H) x 500mm(D). [or 33.46" x 23.62" x 19.68"]
Step 3.
Measure the internal position of the cabinet and mark it. Specific data are as follows [unit: mm]
Step 4.
Install the top base and bottom base

Step 5.
Install the side base.

Step 6.
Assemble the center arm frame


Step 7.
Install the side arm support

Step 8.
Install the center arm support

Step 9.
Install swing tray parts.

Step 10.
Test. Finish!

Detail video >>>>
Be the first to comment