Learn how you can turn a 20-foot garage corner into 70-feet of space with stacked, slide-out storage shelves. Plus, see how to create bonus shelving with leftover wood.
My garage was getting a little out of control. Bulky tools from home improvements projects, boxes upon boxes of holiday decorations, gardening tools, piles of landscaping bags – nothing seemed to have a place.
It was hard to get work done efficiently – not to mention, find something when I was looking for it.
It was time to get smart about garage organization, storage, and shelving.
I decided we needed some sort of shelving tower with deep shelves.
One of the ways I maximized was by using sliding shelves in the storage tower. This increased the number of things our shelf could hold but didn’t compromise being able to easily find them.
It was definitely an easy and practical addition to the garage shelf project.
Determining A Space For The Sliding Storage Shelves
Determining A Space For The Sliding Shelves
I already had several prefabricated metal garage shelves doing a decent job of garage storage, but they had their shortcomings.
I had been eyeing this corner space next to our garage fridge. The space was 3 feet deep and about 6 feet wide, and it was currently underutilized.
There were just piles of boxes, gardening tools, and other things that had accumulated.
Corner spaces in the garage often become dumping grounds, as ours had become. I decided to capitalize on the vertical square footage, transforming this messy corner into garage storage shelving.
So, after a few days of pondering over garage storage shelving ideas and messing around in TinkerCad (an awesome 3D designing website), I came up with the idea below for garage storage shelves:
Garage Storage Shelf Requirements
I had 3 requirements for the sliding storage shelves project for my garage. My first requirement was deep storage shelves. The area had a lot of depth, and I wanted to make the most of the space.
I went with 3 ft deep shelves; this was twice as deep as the prefab shelves, so twice the garage storage space.
The second requirement (which is not evident in the TinkerCad drawing above) was sliding garage shelves.
Although 3 ft deep garage shelves would hold a lot, trying to reach something at the back seemed very burdensome. You would have to move things out of the way to get back there, which wasn’t very efficient, especially for vertical space.
Therefore, I wanted some of the deep garage shelves to be on drawer slides.
My last requirement was enough clearance at the bottom of the garage shelves to fit some of my taller tools (like my shopvac), and for them to just roll out (without having to drop off a shelf).
Get our DIY garage storage shelf plans below by signing up for our mailing list.
Preparing Space For The Garage Storage Shelves
To start the sliding storage shelves, I first cleared out and cleaned the designated area for the garage shelves.
Then I located the studs in the wall (using my trusty stud finder), and used green painters tape preserve their locations.
The garage shelving unit was going to be bolted to the studs to make it stable.
Here’s the wall with the studs marked
Building The Shelf Supports
The actual construction of the garage shelves was fairly straightforward. I just followed the design I created to construct the sliding storage shelves.
The whole garage shelf was made of 2 x 4 wood that was cut to different lengths.
Unfortunately, I was so caught up in the construction (it was a pretty fun project to work on), I forgot to take many pictures. Therefore, I’m just going to provide some visuals.
First, I made 3 vertical support structures for the garage shelves. I would install these on the ends and middle.
These supports looked like a 3 ft wide ladder – see pic below:
Next, I used 6 ft cuts of 2 x 4s to connect the 3 vertical supports, and to form a basis for each garage shelf.
I also added 2 extra 6 ft pieces at the back of the structure to bolt into the wall studs.
Adjusting For Sliding Garage Shelves
Before considering sliding storage shelves, I thought about making all of the shelves look like the very top one. However, that was going to be too simple, and I like to make things a little challenging.
Hence, the modifications for the garage sliding shelves.
The shelf slides were going to bear the load of the garage shelves, so it was not necessary to run as many 6 ft planks as the top shelf (which was just a static shelf with no slides). Three connecting pieces per row was sufficient.
Next, I needed structures to attach the slides to. I came up with the design below:
Notice the 4 slide supports on each row (one on each end and two in the middle). In between each pair of slide supports was going to be the actual sliding shelves.
At this point in the project, it was time to secure the structure to the garage wall. If I proceeded any further with construction, the DIY shelving unit would be too heavy for me to carry (not that it wasn’t already really heavy).
Also, there was just enough room for me to squeeze in between the 2 x 4s to get to back to bolt the structure to the wall studs.
Next, I wedged myself in the middle of garage shelving unit, picked it up like superman, and inched my way over to the wall. I used some lag bolts to secure the shelves to the studs.
Constructing The Storage Shelves
After that, I had to build the actual sliding storage shelves. Here is my design for each sliding shelf:
During the construction of the garage shelves, I did add an elevated piece to the back of each shelf. I didn’t want items falling off the back as I pulled the shelf forward.
First, I installed the slides on each slide support. Then, using ¼” scrap wood as shims, I elevated each shelf and secured them to the slides.
With the sliding shelves installed, the garage shelf project was pretty much complete. Last, I just had to install some gate handles for each shelf to be able to pull them out easily.
Although, I did make a last-minute design decision though – I omitted the bottom row of sliding shelves and replaced it with a static shelf (like the very top one).
I realized that some of my tools (like my miter saw) didn’t have enough clearance to fit on the DIY sliding shelf.
Consequently, I settled for just 2 rows of sliding shelves, which was still plenty of awesomeness.
I took the pictures below of the completed DIY garage storage shelves:
There is also enough space to pull a car into the garage too – with about a foot to spare.
However, I was a little worried about bumping into the garage shelf with the car, so I got a cheap parking sensor to help (it turns from green to yellow to red as you get within a foot of the sensor).
Bonus Storage Shelving
After I finished the garage shelves, I had an extra 2 x 4 leftover. Still in a shelf-frenzy mood, I turned those into some normal shelves on the wall.
To the left of the sliding shelf structure was a hideous area begging for some DIY garage organization, and a prime target for a storage solution:
Using some shelf brackets, I bought a while ago, I threw together a simple shelf for the garage with the leftovers from the main project.
Below is what I turned the above disaster into – see shelf at the top of the picture.
Using The Sliding Storage Shelves
The sliding storage shelves truly transformed a disorganized corner. We gained a ton of lost space through building the shelf tower.
Storage-wise, the garage shelves hold more than we could have imagined – most of the boxes of holiday decorations (Eileen loves that she can easily access these), tool boxes, and large tools such as the miter saw.