10 Packs 115mm/4.5 Inch Super Thin Diamond Saw Blade for Cutting Porcelain Tiles,Granite Marble Ceramics
Universal Design for Dry and Wet Cutting
The blade is designed for both dry and wet cutting applications, making it versatile for a wide range of projects.
X Teeth Design for Fast and Smooth Cutting
With its X teeth design, the blade provides fast and smooth cutting performance for efficient and precise cuts.
Super Thin Blade with Free Chips
The blade is super thin, allowing for efficient and precise cuts. Additionally, its free chips design helps to prevent overheating.
Compatible with Hand-Held Machines
The blade is compatible with hand-held machines, making it easy to use.
Suitable for Cutting Various Materials
The blade is suitable for cutting a wide range of materials, including porcelain, ceramic tile, granite, sandstone, quartz, and more.
CPSIA Warning Label Included for Safety Compliance
For safety compliance, the package includes a CPSIA warning label.
Package Includes
The package includes 10 packs of 115mm/4.5″ super thin diamond saw blades.
Safety Recommendations
Prior to starting any work, it is strongly recommended that you follow these safety recommendations:
Wear Personal Protective Equipment
- Always wear personal protective equipment such as safety glasses, dust aspirators, welding gloves, safety shoes, and other appropriate equipment to protect your eyes, ears, face, hands, and body.
Take Good Care of Your Personal Protective Equipment
- Take good care of your personal protective equipment and inspect it regularly for any damages or defects.
Handle the Saw Blade with Care and Caution
- Always handle the saw blade with care and caution to prevent injury or damage to the blade.
Keep the Blade Away from Children
- Keep the blade away from children and ensure it is properly stored in a safe and secure location.
Shamus –
Too thick I cannot cut jewelry stones without waste.
Leonard –
Made 3 cuts on 3mm granite slab with circular saw and worked fine.
Amber –
Great blades for the money. Been setting tile for 18 years. Initially they do chip cuts. After they wear in they cut very accurately. Wish they lasted longer. But hey, they are cheap. My go too for dry cutting. Great for even the hardest of porcelain.
Jonathan –
I already lost the edge and threw it away
Gemstone –
I used it on a small wet saw table, and it works great. Cut 2 inch thick pavers.
Eaton –
Cuts tiles quickly and smoothly with little effort. Stays sharp
Miranda –
This blade makes very thin straight cuts. I bought it in January and loaned it to my neighbor to do backsplashes in his kitchen and baths. When he finished I used it to cut Greek marble for our master shower (60×40). It has performed amazingly well. Keep it wet and it makes straight chip free cuts with very little lost material
Uriah –
This is a photo of the finished product after using 50 grit pads and higher. This blade cuts smooth and doesn’t leave deep scratches. Good blade for the buck. Will update later if the product doesn’t last long.
Bird –
Bought 5-6 different blades for a tile grout removal job and some porcelain tile installation. These were the only blades to remove 1/8¡± grout lines and cut tile cleanly with no or minimal chipping. The blades are thin approximately 1/16 ¡° and required 2 passes 1 on each side to remove 1/8¡± grout. This made a very difficult job easier as I wasn¡¯t having much luck with more expensive blades from my local box stores and hardware stores.
Nerita –
I had a huge amount of granite veneer to trim for a fireplace. This blade did a great job and lasted a respectable amount of time. I did go through 2 of these blades, but I cut an enormous amount of rock. They lasted a lot longer than a more expensive blade I had from Lowe¡¯s. This blade offered great performance and value.