10 Packs 115mm/4.5″ Super Thin Diamond Saw Blade

70 reviews

$59.45Save: 34%

Delivery: Mar 8, 2024 - Mar 10, 2024
SKU: VA-Saw Blade Categories: ,

10 Packs 115mm/4.5 Inch Super Thin Diamond Saw Blade for Cutting Porcelain Tiles,Granite Marble Ceramics


vadania hardware tools

vadania hardware tools

Universal Design for Dry and Wet Cutting

The blade is designed for both dry and wet cutting applications, making it versatile for a wide range of projects.

X Teeth Design for Fast and Smooth Cutting

With its X teeth design, the blade provides fast and smooth cutting performance for efficient and precise cuts.

Super Thin Blade with Free Chips

The blade is super thin, allowing for efficient and precise cuts. Additionally, its free chips design helps to prevent overheating.

Compatible with Hand-Held Machines

The blade is compatible with hand-held machines, making it easy to use.

Suitable for Cutting Various Materials

The blade is suitable for cutting a wide range of materials, including porcelain, ceramic tile, granite, sandstone, quartz, and more.

CPSIA Warning Label Included for Safety Compliance

For safety compliance, the package includes a CPSIA warning label.

Package Includes

The package includes 10 packs of 115mm/4.5″ super thin diamond saw blades.

vadania hardware tools

Safety Recommendations

Prior to starting any work, it is strongly recommended that you follow these safety recommendations:

Wear Personal Protective Equipment

  • Always wear personal protective equipment such as safety glasses, dust aspirators, welding gloves, safety shoes, and other appropriate equipment to protect your eyes, ears, face, hands, and body.

Take Good Care of Your Personal Protective Equipment

  • Take good care of your personal protective equipment and inspect it regularly for any damages or defects.

Handle the Saw Blade with Care and Caution

  • Always handle the saw blade with care and caution to prevent injury or damage to the blade.

Keep the Blade Away from Children

  • Keep the blade away from children and ensure it is properly stored in a safe and secure location.

Q & A

There are no questions yet

Ask a question

Your question will be answered by a store representative or other customers.

Thank you for the question!

Your question has been received and will be answered soon. Please do not submit the same question again.



An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

Thank you for the answer!

Your answer has been received and will be published soon. Please do not submit the same answer again.



An error occurred when saving your answer. Please report it to the website administrator. Additional information:

70 reviews for 10 Packs 115mm/4.5″ Super Thin Diamond Saw Blade

Based on 70 reviews
5 star
4 star
3 star
2 star
1 star
Showing 62 of 70 reviews (5 star). See all 70 reviews
  1. Fiery

    Selected this brand and blade because it specifically listed marble as a compatible stone to cut. After installing on a brand new Diamondback wet saw table and verifying perpendicularity and flatness, I attempted to cut my first 10mm thick 12″x24″ marble tile. The blade definitely cut the marble with no problems. However, the finish was less than ideal as it chipped throughout the entire cut. See attached pictures of factory edge and cut edge. I tried flipping the tile over for another cut and trying slower feed rate with same poor results. You can see where the chipping was being created with the blade design which is the trailing edge of the “silver” cutting section as it exits the tile under careful observation. Knowing this, I tried to adjust the depth of the cut so the thickness of the tile is only within the “silver” section and again, no luck. So I can either try another blade mfg or continue on by planning where my cuts are and making sure they end up against the walls and not visible. This was the only way I could salvage this project. Chipping is not acceptable with the grout width and end result I wanted so perhaps better suited for something else and thinner tile? Who knows. I would not recommend this tile blade for marble if you want pristine edges.

  2. Beryl

    like how easy it cuts tile.

  3. Pandora

    Worked well on hundreds of small cuts for my mosaic marble tiles project. Went slow. Back-cut where possible. Very few chip outs. Very pleased.

  4. Ruler

    Great product

  5. Erwin


  6. Heroine

    Only did 20 cuts on and the hub on the disc went out. Couldn¡¯t use it any more. I did received a new blade from seller, I will buy from them again??

  7. Davida

    This blade worked great for cutting extra large format (24¡± x 48¡±) porcelain tile. I used a ryobi cordless angle grinder and a little bit of water with a sponge.This tile tended to chip easily with the Makita 4100kb tile saw I was using and the stock blade it came with. I also used a straight edge with this saw to make sure my cuts were straight.Once I switched to this blade and the angle grinder and got comfortable, it made easy work of cutting the tile free hand. And there was less chipping overall when taking multiple passes (light cut to start) and keeping the blade perpendicular to the material. The blade also worked well for grinding material off of edges that required some extra material removal.

  8. Virginia

    works really good

  9. Germaine

    I¡¯m very glad that I did. After 50 or so cuts on 8¡± tile the edges are still very good. I tape the face of the tile with duct tape and that seems to help maintain a good cut. I have another 30 or so cuts so I may have to purchase another blade but it Is worth it when the finished job looks straight and clean.

  10. Herbert

    Used to cut porcelain tile. No complaints with this blade.

Add a review