12-Pack Solid Steel Floating Shelf Brackets, Hidden Floating Wall Shelf Support Bracket for Floating Wood Shelves
- Package Content: 12-Pack Floating Shelf Brackets
- Made of Cold Rolled Steel matte black/white powder coated design, widely used in home and office areas.
- Ingenious design creates the illusion that your shelf is floating, enhance the flexibility of space.
Heavy duty welded construction so won’t bend or break - Quick and easy installation, just simply drill a hole in the shelf to fit the diameter of the rod and screw into the wall
Pipe diameter: 10mm / 0.4″
HOW TO USE BLIND SHELF SUPPORTS:
- STEP 1: Place your first hidden bracket against the wall, using a spirit level to make sure it’s level. Mark the fixing-hole positions with a pencil.
- STEP 2: Using the pencil marks, drill holes into the wall. Always choose screws or fittings that are suitable for the material of your wall. Screw the bracket into place.
- STEP 3: Slide the shelf onto the bracket to check that it’s level (use the spirit level to make sure). Once you’re happy with the position of this shelf and the way it looks,
slide it back off the bracket so that you can position the rest of the brackets. - STEP 4: Once all the brackets are in place,
slide the shelves on and fix into place with the small screws provided with the shelf, using the pre-drilled holes on the underside of each shelf.
Esther K. –
Perfect for my little homemade shelf,everything was flush and not bent or damaged
SE Romance –
These brackets worked great for us. We installed heavy, rough cut juniper, onto the brackets and feel very secure placing our items (even the vintage cookie jar).
Sheila –
I needed the shorter wall mounts for a home project. They are sturdy, fairly easy to install if you have a basic knowledge of measuring and hanging. Take the time to secure to your wall studs for extra strength. There is wood behind the zinc mantel which added weight.
J. Rizo –
It took some planning as to how to measure and install but turned out really good. It was a 2 man job to make sure they were level and mark the bracket holes at the same time. I used blue tape to mark where each shelf would go and to mark the holes.
Zach and Sara –
Metal brackets were very sturdy. I was able to use them to install an 8ft floating shelf. However the drywall anchors were complete crap. They werenЃft able to be used in this set and had to get stronger ones from the hardware store. The rods are a great value but plan on getting different anchors and screws
Victorian house renovator –
These are excellent brackets. IЃfm not deducting for the anchors because itЃfs a fair price without them?and these should be screwed into studs with heavy duty #10 construction (structural) screws anyway. Zero complaints.These are made of heavy metal, and having individual brackets letЃfs you control their placement (as opposed to the bar-type hidden brackets that are fixed-width), allowing you to hit studs, even if the studs are not evenly spaced.I also didnЃft deduct for the shelves not fitting flush, because all floating shelf brackets strong enough to bear weight require chiseling out indentations around each hole to accommodate the mounting plate. ItЃfs the nature of the beast. If the metal was thin enough to allow the shelf to be flush without chiseling, it would bend and pop off the wall with the load! Physics.Tips:?the thickness of the shelf needs to be minimum 2x__ stock (E.g., 2×6, 2×8, etc). These wonЃft work with 3/4Ѓh thick shelves.?One should (almost never) use drywall anchors included with *any* product. Plastic anchors donЃft work unless your mounting feathers. (Or smoke detectors. ;P)?There is only one drywall anchor on the market I would consider for any heavy, load-bearing application like shelving or TV mounts: Wingits. TheyЃfre rated at 300lbs per anchor and they are the real deal. IЃfve done a whole-wall adjustable shelving system in an old house where I was only able to hit a single stud over a 10Ѓf span. Used Wingits for the uprights and itЃfs rock solid, holding hundreds of pounds of books for a bibliophile. Even large toggle bolts will fail eventually under heavy load. DonЃft do it. Toggles donЃft prevent downward shear, and will pop out under heavy load leaving a big hole in your drywall. If you use Wingits, buy their drill bit?success depends on a perfect hole.Hope this helps.
Keren –
Worked great for my new shelfs
Z Customer –
Very sturdy and easy to install
Naoko Witmer –
Easy order , good product
Karrie Wolf –
We used these on walnut butcher block floating shelves in our kitchen. They are sturdy and easy to install. I am very happy with them. I will be installing more in other rooms.