8-20Pcs Stainless Steel Corner Bracket, Black Metal
- 【Support Heavy Weight】These heavy duty corner bracket made of premium stainless steel, support heavy weight and not easy to break. In additional, stainless steel material for long lasting protection, against rust, you can use it both indoor and outdoor.
- 【Multiple Usage】Design for furniture fixation, you can use them to fasten wood wall hanging, chair, wooden table, window, furniture, wooden bed, dresser, shelf and drawer.
- 【Easy To Install】Even if you are not good at DIY, it is easy to install, just use screwdriver or electric drill to fix the bracket in a breeze.
【Brackets Size】
- 60mm*25mm*25mm, Thickness: 1.7mm; 2.4″*1″*1″, Thickness: 0.07″; Pack: 20Pcs
- 80mm*21mm*21mm, Thickness: 1.8mm; 3.1″*0.8″*0.8″, Thickness: 0.07″; Pack: 20Pcs
- 100mm*26mm*26mm, Thickness: 1.8mm; 3.9″*1″*1″, Thickness: 0.07″; Pack: 12Pcs
- 140mm*26mm*26mm, Thickness: 1.8mm; 5.5″*1″*1″, Thickness: 0.07″; Pack: 8Pcs
- 201mm*25mm*25mm, Thickness: 1.8mm; 7.9″*1″*1″, Thickness: 0.07″; Pack: 8Pcs
【Bracket Bearing】
- About 300lb / 136kg
%20Lightweight%20Caribeaners%203.15in,%206%20Packs&url=https://vadania.com/product/12kn-2697-lbs-lightweight-caribeaners-3-15in-6-packs/&media=https://vadania.com/wp-content/uploads/2022/11/主图_002-9.jpg){kind=link}
WING K. –
Looks like it is made out of non magnetic stainless steel. Very usable. Would be much better if it is at least 50% thicker since these brackets are countersunk.
JeepGuy –
As the title says, they are thin but sufficient and worked well for my needs. They are a soft metal and bend very easily so if you need something for more structural support I would go with something different.As these are non load-bearing and more for the added support than anything they were sufficient for my project which will have very minimal weight bearing (5-10 lbs at most)If I would need to build something similar I would buy them again however for something needing more strength I would get a more heavy duty plate.
Alan Whitesell –
These are made from stainless steel, a magnet will not stick to them.
glasslaw-texas –
It did the job of joining and leveling two leaves of an old, old table. I would have hoped for a bit more thickness but to remove my concern I doubled up pieces in three locations. With 10 pieces being furnished I had an extra four pieces to use as added (and probably unneeded) security.
Jeffrey Barnhill –
I used these in an area not easily seen, but weathered. Plenty sturdy enough. Seemed stamped out and the long edges were sharp on the lower edges. Hit them quickly with a file and good to go. Shiny side came with a protective film which was nice. Good price and such pieces in stainless are not a typical hardware stock.