1.5″-3″ Caster Wheels 4-pack No Noise Casters with Polyurethane (PU)
Wide Application: Suitable for indoor and outdoor use, these caster wheels can be easily mounted on trolleys, workbenches, furniture, shelves, and other items commonly found in workshops, garages, kitchens, offices, and more.
Silent Operation: Designed for a quiet operation, these caster wheels produce minimal noise while being pushed. They are also equipped with a strong load capacity to carry heavy items without any hassle.
Double Brake System: Our top plate swivel caster wheels come with a double brake system, which allows for easy operation and better control. The brakes can stop the rotation direction of the bottom plate as well as the forward direction of the wheel.
Standard Set: Each set includes four caster wheels, providing a complete solution for your equipment mobility needs.
&url=https://vadania.com/product/caster-wheels-4-pack-no-noise-casters-with-polyurethane-pu/&media=https://vadania.com/wp-content/uploads/2023/01/微信截图_20230131151429.png){kind=link}
%20Lightweight%20Caribeaners%203.15in,%206%20Packs&url=https://vadania.com/product/12kn-2697-lbs-lightweight-caribeaners-3-15in-6-packs/&media=https://vadania.com/wp-content/uploads/2022/11/主图_002-9.jpg){kind=link}
CM –
I originally installed these under a plywood cabinet I made for holding my entertainment center components, which while loaded is pretty heavy and they hold up great. Most recently I made a food stool and used another set on it. It’s smaller and doesn’t need all four casters locking, but it was also an easy install and works as well as expected. I do with they had sets of these with either no locks or a set of four with 2 locking and 2 not locking.
KELLY HARMON –
Easy to install, they seem very sturdy and the lock feature is nice. IЃfm using them on an oversized storage ottoman
Dan Bates –
Needed longer screws than the ones provided
Ron Q. –
Nice set of casters for price. Roll great and lock holds steady
Keith –
Very well built and works as should
Walt’sBoy –
These wheels were almost a perfect hole match to the Harbor Freight(HF) wildly liked toolbox. 3/4 casters pattern worked out of the box. One caster unit that was a little off the HF preset holes that was easily fixed by running/reaming a 1/2 bit through the hole that was just off the ASHGOOB pattern. The fix took two seconds and then lined up perfectly. HF wheels work but IMHO are 1) flimsier aluminum 2) only two rotate. Changing from the 5 inch HF wheel to the much more solid ASHGOOB 4″ Caster (all four) Wheels with Brakes was amazing upgrade. The HF Yukon is now MUCH more solid lower to the ground and with these wheels rolls A LOT easier. The only minus was the brake (seen locked in photo) is close to HF box frame – it works with a little ‘oomph’ and has tight clearance but not an issue so far. Overall, highly recommend one of the best wheel sets I have seen and used!