Full Extension Drawer Slides VA1245 5-Pairs

106 reviews|2 answered questions


Delivery: Feb 25, 2024 - Feb 28, 2024
SKU: VA-TRACK(45BSC)-B Categories: , Tags: , , ,

VADANIA VA1245 Drawer Slide Ball Bearing 3 Folds Full Extension, Side Mount, 100 Lb Load Capacity, 1 Pair (2-pack)

VA1245 drawer slides

VADANIA VA1245 Drawer Slides

The three part extension allows for a higher load capacity and smooth movement. Featuring metal ball bearings for a quiet and comfortable closure.

High – tension cold-rolled steel plates, 100,000 times of 100lb push-pull tests without damage

Suitable for Civil Furniture, Office Furniture, Cabinets/Wardrobes, et

Q & A

What Vadania product would be most appropriate for a kitchen drawer in a high traffic area? I’m considering push to open Vadania vf1245 since we need to have no handles to snag on. Will that product work or will it accidentally open frequently? Alan asked on May 23, 2023

VF1245 push to open slides are the popular model for kitchen drawers. And you can check the VF1245 video from this link: https://youtu.be/jqmILQI-EK8

raymond answered on May 23, 2023 store manager
(0) (0)
Can I get a soft close mechanism for VK 1245? brad Hull asked on November 7, 2022

Hi Brad,
Yes the soft close device can be replaced. Please contact our official email for detail. And please attached your order number.
email: info@vadania.com

raymond answered on November 8, 2022 store manager
(0) (0)

Ask a question

Your question will be answered by a store representative or other customers.

Thank you for the question!

Your question has been received and will be answered soon. Please do not submit the same question again.



An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

Thank you for the answer!

Your answer has been received and will be published soon. Please do not submit the same answer again.



An error occurred when saving your answer. Please report it to the website administrator. Additional information:

You may also like…

106 reviews for Full Extension Drawer Slides VA1245 5-Pairs

Based on 106 reviews
  1. SD Wood

    These are great to make the cabinet door slide out with the trash can in it. Holds the weight of the door and the full trash barrel no problem.

  2. Gregory A. Gum

    Decent product so far

  3. Robust

    These slides are sturdy and fit perfectly. I’m very satisfied with my purchase.

  4. Steward

    These guides are very solid, with smooth action, and the delivery was great!

  5. David Velliquette

    I don¡¯t like how it sticks out like 1/4¡± or so before it gets locked into the fully recessed position. Many people might like that feature, though.

  6. zeit37

    Strong, heavyweight sliders that have a removable rubber stop at the end of travel so the sliders will hold in place until pulled out if that¡¯s what you need.

  7. Wanderingramza

    I replaced a broken set of slides in my Kobalt top toolbox. Measurements were close. Installation was a breeze. Saved my box from the scrapyard for sure. I wouldn’t hesitate to buy these for woodworking projects either but I riveted them back in like the original in my toolbox and passed on the screws included for use in wood.

  8. Egerton

    Just what we needed to repair a dresser. They worked great!

  9. Hanne Saarinen

    I used these drawer slides to replace some super-old and worn out slides on my computer desk. I have a slide-out keyboard tray (I hate keeping my keyboard on the desktop) and the old slides were noisy, gritty and no longer held closed in the ‘shut’ position. I installed these slides in a matter of a few minutes with a power drill and screwdriver. I did have to drill new mounting holes and measure out where I wanted the slides as they were significantly different than the old slides. However, the minor bit of work was worth the effort. These new slides are quiet, smooth, and most importantly for me: they hold in the closed position with a nice positive click. They come with some short countersunk phillips-head mounting screws which should work for most people’s applications. I’d recommend them if you need a single pair of drawer slides for a small project. They’re reasonably priced, perform well, and are easy to mount with included hardware. No instructions are included but it’s incredibly straightforward if you’re even remotely mechanically inclined. Very straightforward.

  10. DW S.

    These were fine and would have worked well. They were to replace Harbor Freight’s sliders on their wood work bench. These made the drawer too wide and would not work. They made in 3-4mm too wide.

Add a review