Folding Shelf Brackets, Max Load 300 lb, Heavy Duty Stainless Steel Collapsible Wall Mounted Shelf Brackets for Table, Space Saving DIY Bracket, Pack of 2 pcs
Full Range of Models & Powerful Support
- Models include 8″/10″/12″/14″/16″/18″/20″ foldable shelf brackets to meet different size requirements.
- Max Load: 330 lbs / 152 kg. The need to increase the load capacity can increase the number of hinge in the interval.
How to Choose the Size
- It is recommended to match the depth of the partition with the length of the bracket to ensure the maximum carrying capacity.
- The protruding depth of the partition will increase the torque of the support arm. As the torque increases, the carrying capacity will decrease (leverage principle).
Space Saving
- The folding bracket can be locked at 92 degrees. When not in use, you can fold the table to save space.
- You can use it to extend the folding workbench in garages, laundry rooms, kitchens, garages, boats, yachts, front desks, backyards, RVs, barbecue grills, trailers, bedrooms, balconies, bathrooms, etc.
Easy to Install
- Even if you are not good at DIY, it is easy to install.
- The package includes the appropriate mounting accessories, high quality stainless steel screws and Expansion anchor.
- You just need to make sure that the two brackets are parallel to each other and perpendicular to the wall.
Rugged & Durable
- The shelf bracket is made of high quality stainless steel with good corrosion resistance and rust resistance.
- No coating, no paint, easy to clean, wire drawing process, can prevent daily scratches, and keep bright as new.
Lennie Hurdt –
The brackets are being used to support an extension to a kitchen counter. They work well but not without some issues. There were burrs around the edges ( the manufacturer did not keep the dies sharp) which were removed with a Dremel grinder especially around the releases where fingers poke. The shelf sagged so shims were needed to make it level. Screw holes are too big for the screws provided.
Vinny D’ –
Needed more shelf space in my teardrop camper. Did not take long to install.
Sarah Goss –
I needed to extend my counter top in my trailer and I used a bamboo cutting board for it. Works really well and was easy to install.
Sun –
Spouse is wheelchair bound and couldn’t reach countertop for cutting, etc. Used these with a heavy cutting board to make a work surface lower so she could access. Works like a champ. The hinges are super strong and easy to use. Very pleased with how they work. Was easy to mount them as well.
Keaka 2 –
Sturdy. Added great space to my little kitchen
Matthew D. Splechter –
Solid built brackets. You will need a long screwdriver to tighten screws through folding bracket braces.
E. Waldorph –
I used these collapsible shelve brackets to attach to the back of my roll away work bench in my garage. The work great and have added to the flat useable work space I have. I¡¯ve placed items that weigh over one hundred pounds on it and the brackets held up great. The only thing you need to know is that the pre-drilled screw holes made by the manufacturer requires a couple inch extension bit if you¡¯re going to use a power driver to install the screws. Not that big of a deal and I would definitely recommend and buy the brackets again.
Logan Newman –
These brackets were purchased to put a shelf on the front of my pellet grill, they are well built and fold up and down smoothly. They work perfect, great brackets and at a great price.
Katie McAnally –
Brilliant piece of engineering, easy to use once installed, however, not installation guides & while some screw holes are positioned to allow acres to be set by a drill, the position of some of the screw holes requires thin manual screwdrivers & quite a bit of manipulating.
Mr. Practical –
Tiny Houses rely on space savers. These supports allowed us to have a fold down table in our kitchen. Very sturdy and have had 60 pounds on it. Would buy again.