VADANIA Kitchen Cabinet Blind Corner Pullout Organizer for 36/32-inch Cabinet, 2 Tiers Swing Tray, Soft Close
VADANIA Kitchen Cabinet Blind Corner Pullout Organizer – To be simple, beautiful and practical. Make your dream kitchen.
Butterfly wing shape design
with beautiful corner lines and guardrails, plays a very good role in fixing and protecting
Features
|
|
|
|
|
|---|---|---|---|
Full put outOffer exceptional resistance to corrosion and rust. Virtually indestructible and never chip or crack, saving a lot of maintenance or replacement cost. |
Soft closeSoft close design for steady carrying. Stand up to coffee, wine, and grease, highly resistant to dirt & grime. |
Galvanizing treatmentScratch resistant, stain resistant, chip resistant, and thermal-shock resistant. |
Heavy dutyMaximum load of each tray is 32.5lb. Can store all kinds of pots |
Clever design for 36″/32″ cabinet
make full use of cabinet corner space, increase kitchen storage capacity
RCW –
Had a minor issue that the company quickly took care of. They actually called me back on a Saturday and I had the small issue fixed by Wednesday of the following week. My friend had bought another brand that was a lot more money.. Can’t tell the difference between them.
Great idea, really enabled me to better see all the pots and pans that were hidden in the side of the cabinet that I had to get down on my hands and knees with a flashlight to find.
Now I just lightly pull the front of the shelf and the whole thing slides right out.
Mike –
Good with some issues look nice but poor space storage
Mevenson –
We purchased these shelves for a corner cabinet in a home where the unit was missing. We are so happy we purchased this item. Now our things are not all thrown in the cabinet. We can easily reach everything, and things are no longer getting chipped and broken from being stacked. It holds quite a bit of weight – a mixer, food processor and all its parts, blender and a few other things. It was easy to install and fits perfectly.
Zelek –
A single page Installation sheet for left hand unit only is included. If you need a right hand unit, as I did, all instructions need to be reversed. All installation dimensions are in millimeters and would need to be converted to inches, if required. I needed a right hand unit, so I scanned, flipped the drawings horizontally, converted to inches and added legible text using Adobe Photoshop. This helped understand how this unit assembles and installs. After structural modifications to my corner cabinet, the unit was installed. After a few minor adjustments to the vertical pole and side plate locations, the trays were mounted on the 3 hinge pins and opened and closed perfectly. There is a rotating block on the rear hinge pin that adjusts the maximum open position, that is helpful, so the trays do not make contact with an adjacent door frame. The soft close feature works well and the unit has a quality look. Other than the installation sheet confusion, the support pole and side plate minor location changes, I am pleased with the performance of this dual tray corner swing out product. Studying the drawings after reversal, helped me see how this unit assembles and functions before starting the installation. I’ve include a few photos to see the final installation.
Tend –
a little flimsy,Three Stars
barbie –
The instructions were for a left side but we ordered right. Made installation far more difficult. But the shelfs are really nice and they self close. They hold more than I expected. Very nice unit.
GK –
Item came on time and as advertised. It was a little difficult to install but only because I’m a little 3 dimensionally challenged. Once my wife helped explain how it would work, the installation went smoothly.
Ron –
I can save more place now!
sante –
This was helpful and priced reasonably. I would definitely buy it again, however, I hope it’s not necessary to replace it.
Norman M. –
Once you figure out how to install it, the shelves work smoothly and I would buy it again. The directions are an issue, first imagine the worst printer you ever owned printed the directions, I ordered a right hand shelf and the directions were for a left hand shelf, so everything shown had to converted in your mind to a mirror image. I am not sure if was the wrong directions or they only print a left side and why $.10 of the purchase price could not have gone for the proper directions. Everything so far could be figured out with a magnifying glass and some unnecessary thought, but a key component is shown absolutely in a very wrong position mounted on another component. You have to cheat ahead in the directions and use some deductive reasoning to figure out the proper installation. The motion of the shelf is smooth after assembly and time will tell if some of the plastic parts will hold up, but I assume the plastic parts are why it is not a more expensive shelf.