1Pair/5 Pairs Metal Drawer Slides, Ball Bearing Two Way Slide Track Rail 0.7 Inch Wide
- Package includes: 1 pair of drawer rails (mounting screws included). Note: Please read the installation steps in detail when you install it.
- EASY TO USE – Drawer rails are designed with multiple fixed hole positions for easy installation and adjustment. Two-way sliding, more comfortable and faster.
- Material: Ball Bearing Drawer Slides work with hardened cold rolled steel with zinc plated finish that will give you a precise thickness and a smooth surface.
- Design: 2 sections, stainless steel balls in the ball positioning groove that can be in the sliding direction of the ball, are not easy to deviate, and are wear-resistant, hard and smooth.
- Function: The soft close function prevents noise during pushing, makes it quieter, and the slow close function prevents your baby’s hands from gripping the drawer.
Specifications:
- Color: Silver
- Load bearing: 10kg
- Material: cold rolled steel.
- Finish: Zinc Plated.
- Features: 2 sections, two-way.
- Package includes: 1 pair/5 pairs of drawer glides (mounting screws are included).
- The 17mm slides is a two way slides, the inner slides is not removable.
How to install
- Slide the drawer slide to expose the mounting hole.
- The narrower part is screwed to the inner side of the “side wall” with the wood screws.
- The wider part slides into a slot in the side of the drawer and is attached by one of the screws passing through a hole from the inside of the drawer and screwing into the threaded hole in the wider slide part.
- Note: There will be a hole in the drawer to lock the screw, which will not affect the use.
MidwesternBlondie –
Wish it came with more screws. Other wise very happy I didnЃft have to find a whole new dresser and could fix mine. Will order this again if my other bearings fail.
Jessey G –
My Alex drawers drawers slides broke and IЃfm glad I found this since its not available for purchase at IKEA. Easy to install too!!
private –
Was looking for this exact size of slider. Worked very well, thank you!!!
JackOfTrades –
The design of the drawers in an heirloom dresser meant that slides with a much smaller profile were needed than ones available through a local woodworking store.These fit the bill well, and are working great after several months of use.Notes:1. The screws supplied with these were not used. If I have to list a single negative, that would be it I re-used the larger diameter ones which were original to the furniture.2. The holes for mounting these did not line up with the existing locations in the dresser. You may have to add some like I did.3. Although there was a small amount of lubrication in the bearings when these arrived, I added some, and worked it into the system by extending and compressing the slides before I mounted them.
Bethany –
I have the ClosetMaid 1566 Stackable 2-Drawer Horizontal Organizer and the top drawer slides broke. I kept finding the little ball bearings everywhere. These are a bit shorter than the current drawer slides but are workable with a power drill to make new holes. My drawers went from being ready for the dumpster to functioning drawers again. I think these are nicer slides than what it came with.These came with no instructions so it took a little trial and error to get them to work. I found it best to attach to the outer casing before attaching to the drawer. The fact that the slides moves both ways helps with the slides being shorter than the ones the drawers came with it. I couldn’t find slides that were the correct length for the drawers but would also fit the gap on the drawer. These definitely are .7 wide because they fit the groove perfectly.
KT –
I purchased these gliders to replace the ones on my dresser. Somehow when moving, the drawers were ripped out of the dresser and the gliders were damaged or lost. They weren’t the same size as the ones that came with the dresser but worked great as a replacement. When I first started the installation, I was having a hard time trying to get the screws in. I had to ??, what could I do without calling someone for help. Which would have taken weeks…. So I looked in my toolbag and found a miniature screwdriver ??, and a hammer ??. I used these to start the hole for drilling the screws in. Once I got that going, it was easy peezy. Didn’t take no time at all for the rest of installation. Less than an hour. Attached the drawers and they are perfect. They actually open and close better than the original ones. I gave it 4 stars because I had a hard time getting the screws to go in. Other than that… No problems
pat l –
single pc units that do not separate. gave 4 stars just because of the added trickiness of installing in already assembled cabinet. would have definitely been easier if put in before item assembled. do like the fact of getting the screws with it. still like the slides and would purchase again if needed
Steve –
Needed these for a very thin drawer these slides can open in either direction. There sturdy and smooth When opening.
Matrix2020 –
Be very careful measuring your side rail as if it 22mm or .7Ѓh most standard US sliders like at Home depot donЃft fit as they are too wide for the groove. And for some reason many on line listing do not say in the specs what groove they are intended for. These are exact replacements for Plummers desks drawer side sliders and Scandanavian furniture. Note: it is a simple slider and does not fully extend as the original does not.
Jennifer –
Exactly what I needed for refurbishing my file cabinet.