Two Way Slide Metal Drawer Slides, 1Pair/5 Pairs

43 reviews


Delivery: Mar 4, 2024 - Mar 6, 2024
SKU: va-2ws Category:
1Pair/5 Pairs Metal Drawer Slides, Ball Bearing Two Way Slide Track Rail 0.7 Inch Wide


  • Package includes: 1 pair of drawer rails (mounting screws included). Note: Please read the installation steps in detail when you install it.
  • EASY TO USE – Drawer rails are designed with multiple fixed hole positions for easy installation and adjustment. Two-way sliding, more comfortable and faster.
  • Material: Ball Bearing Drawer Slides work with hardened cold rolled steel with zinc plated finish that will give you a precise thickness and a smooth surface.
  • Design: 2 sections, stainless steel balls in the ball positioning groove that can be in the sliding direction of the ball, are not easy to deviate, and are wear-resistant, hard and smooth.
  • Function: The soft close function prevents noise during pushing, makes it quieter, and the slow close function prevents your baby’s hands from gripping the drawer.

vadania hardware tools

  • Color: Silver
  • Load bearing: 10kg
  • Material: cold rolled steel.
  • Finish: Zinc Plated.
  • Features: 2 sections, two-way.
  • Package includes: 1 pair/5 pairs of drawer glides (mounting screws are included).
  • The 17mm slides is a two way slides, the inner slides is not removable.
How to install
  1. Slide the drawer slide to expose the mounting hole.
  2. The narrower part is screwed to the inner side of the “side wall” with the wood screws.
  3. The wider part slides into a slot in the side of the drawer and is attached by one of the screws passing through a hole from the inside of the drawer and screwing into the threaded hole in the wider slide part.
  4. Note: There will be a hole in the drawer to lock the screw, which will not affect the use.

Q & A

There are no questions yet

Ask a question

Your question will be answered by a store representative or other customers.

Thank you for the question!

Your question has been received and will be answered soon. Please do not submit the same question again.



An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

Thank you for the answer!

Your answer has been received and will be published soon. Please do not submit the same answer again.



An error occurred when saving your answer. Please report it to the website administrator. Additional information:

You may also like…

43 reviews for Two Way Slide Metal Drawer Slides, 1Pair/5 Pairs

Based on 43 reviews
  1. B. Baker

    I have some old Dania office furniture that all of the pieces use the groove drawer glides. I have looked all over for replacements and found these. These are a bit longer than the original ones on my drawers but they still fit and even have the same hole placements. They work perfectly. Being a little longer I thought I might have a longer open extension but it is the same as the old glides. Still very pleased.

  2. Alvin M Takata

    Used them to replace original Drawer slides

  3. runbunny84

    I bought these to replace my slides on a dresser. Movers destroyed the original slides and bearing started to fall out. These slides are not as good as my original slides. There is too much friction and not very smooth but they work fine. I had to drill holes on both sides of the slides as the holes didn’t line up. The metal is pretty strong as it took some time to drill through. I also had to tap the threads out of one hole and the metal was thick enough to support a few layers of threading. Overall, it’s fine product but I wish they were smoother.

  4. Alexia

    Worth your penny ! Very very sturdy . Will purchase again if I need to replace another part on my sons dresser.

  5. Lesley A Scales

    These drawer slide are an inexpensive alternative to replacing file caninets with broken drawer slides. They fit perfectly without any modification to the drawer or cabinet. They are simple to install and use the existing screw holes. Not drilling, no mess. Just mount the new slides using a philips head screwdriver and you are back in business. Quick and easy.

  6. Jon G

    Perfect rails to replace the very cheap plastic rails Ikea installs on their kids dresser sets. Only wish they would have an easy way to remove the drawer but that seems to be common for this type of rails. Also you’ll need some M4 machine screws since they are not included. In my case I needed M4x10mm but that depends on the thinkness of your drawer side.


    Price and quality

  8. Xander K. Wu

    I chanced it, it worked out. Item was maybe 3/4 inch longer in length but it worked. Drawers slid out even more giving me a bigger opening.

  9. Josh Luker

    Replaced the rails on a dresser drawer. One of the rails was slightly damaged upon arrival but I was able to fix it and it functioned fine. They roll pretty smooth and serve their purpose.

  10. solardude

    Finding the right match for my older dresser with European slides was difficult. The furniture store no longer sells them and they weren’t available in hardware stores. When I finally tracked down the manufacturer their prices were too high. I stumbled on these after a long search. They were the exact match for a bargain. I recycled my original screws otherwise installation was a breeze.

Add a review